AD08- 4G OBD GPS Tracker With Microphone For Voice Monitoring
Product Introduction
Choose our 4G OBD GPS Tracker for a cutting-edge, user-friendly, and feature-rich solution that elevates your vehicle tracking and monitoring capabilities.
description2
Specification content
| Specification content | SPECIFICATIONS |
| Product number | AD08-4G |
| Dimensions | 51 *30.6*29.5mm |
| product weight | 38g |
| Targeting | GPS+Beidou+LBS |
| Chip model | MTK2503 |
| GPS sensitivity | -162Db |
| Accuracy | 3-30 (m) |
| Hot Start | Average 2sec |
| Warm Start | Average 30sec |
| Cold start | Average 38sec |
| spare battery | 60mAH(3.7V) |
| Operating Voltage | 12V-90V |
| LED lights | 2 LED LIGHTS SHOW GPS, GSM STATUS |
| Installationmethod | STRONG MAGNETIC ADSORPTIONWITHOUTINSTALLATION |
description2
Parameters
|
Function |
Description |
|
Real-time Tracking |
Upload the longitude and latitude information according to the time interval. |
|
Historical Playback |
Support device historical playback, operate through platform or APP. |
|
AGPS |
Support AGPS, Capture signal quickly |
|
GEO-Fence |
Support GEO fence settings, vehicles entering and leaving the fence trigger an alarm. |
|
Voice Monitoring |
Support remote monitoring, control switch and monitoring time through SMS commands. |
|
Blind Area Data Updating
|
The data is stored up to 300pcs. if the terminal is located and not online,upload this data when the signal is good |
|
EPO Assisted Positioning
|
The terminal supports the EPO assisted positioning function to enhance the positioning effect. |
|
Inflection Data Updating
|
When the angle of the vehicle turns is more than a certain angle, the device will upload a position information to the platform to optimize the trajectory. |
|
Power Down Alarm
|
When the power supply of the device is disconnected, an alarm is triggered, and the function can be turned on and off through SMS commands. |
|
Over Speed Alarm
|
Set the maximum speed limit value on the platform or SMS, when the GPS speed is more than the value, the device will upload a alarm to the server. |
|
Low Power Alarm
|
Set the number of volts below the external power supply voltage through SMS command, and alarm the center number; Voltage range is 7 ~45, 0 means the function is off.
|
|
Vibration Alarm
|
Support device vibration alarm, control switch and vibration sensitivity through SMS commands. |
|
Anti-dismantle Alarm |
Support anti-dismantle alarm, equipment removal, trigger alarm, the function is the same as power down alarm. |
|
Command to Get Location |
Through SMS or platform to get latitude and longitude,current time, speed, current voltage value, Google Maps link. |
description2
Download Brochure
Features
